Otros Cutting Mills

 
 

OTROS GRUPOS DE PRODUCTOS

 
 

Universal Cutting Mill - variable speed 300-3000 rpm

PULVERISETTE 19

Nº de pedido
19.3060.00
Detalles del producto

Technical Data

Working principle cutting
Optimal for material type medium-hard, soft, brittle, tough, fibrous
Cutting tools rotor with V-cutting edges and fixed knives, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives
Materials of the cutting tools hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01
Max. feed size (depending on the material and funnel) 70 x 80 mm
Max. throughput (depending on the material and sieve size) 60 l/h
Final fineness (depends on sieve cassette - additional sieve sizes available) 0.2 - 6 mm
Feeding batchwise/continuous
Variable rotor speed (depending on voltage and frequency) 300 - 3000 rpm
Rotor peripheral speed 1,57 - 15,7 m/s
Drive Up to 5 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque
Electrical Details/torque 380-460 V/3~, 50-60 Hz, 5000 watt, 30 Nm
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve insert used) LpAd = 78 dB
Weight 60 kg
Dimensions (W x D x H) table mounted or on support frame 44 x 79 x 56 cm

 

The Universal Cutting Mill PULVERISETTE 19 with variable rotational speed 300-3000 rpm is available in the following voltages and versions:

Order no. Electrical details/ Torque
(three-phase motor with frequency converter and flywheel mass for stabilising the drive torque)
19.3060.00 for 380-460 V/3~, 50-60 Hz, 5000 watt, 30 Nm
19.3020.00 for 200-240 V/1~, 50-60 Hz, 2350 watt, 10 Nm
19.3030.00 for 100-120 V/1~, 50-60 Hz, 1725 watt, 8 Nm

The PULVERISETTE 19 with voltage of “/3~”can only be operated on a three-phase supply network.
Despite the frequency converter, the three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version achieves a higher torque mass and pulling power.

The single-phase versions of the new Universal Cutting Mills PULVERISETTE 19 also have an especially maintenance-free three-phase motor with a frequency converter.

 

 

Nº de pedido
19.3060.00
Janine Allkofer
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Teléfono +49 67 84 70 0

Base de datos de protocolos de molienda

PROBAR AHORA

MOLIENDA DE PRUEBA INDIVIDUALMENTE

Envíenos su muestra. Realizamos una muestra de molienda y recomendamos el dispositivo adecuado para su aplicación.