Otros Cutting Mills

 
 

OTROS GRUPOS DE PRODUCTOS

 
 

Cutting Mill

PULVERISETTE 15

Nº de pedido
15.4030.00

Technical Data

Working principle cutting
Optimal for material type medium-hard, soft, fibrous samples
Cutting tools rotor with straight cutting edges and fixed knives
Materials of the cutting tools tool steel, stainless steel 316L, chromium-free tool steel, chromium-free steel DC01
Max. feed size (depending on the material and funnel) 70 x 70 mm
Max. throughput (depending on the material and sieve size) 50 l/h
Final fineness (depends on sieve insert - additional sieve sizes available) 0.25 - 20 mm
Feeding batchwise/continuous
Rotor speed 2800/3400 rpm*
Rotor peripheral speed 14.92/17.9 m/s*
Drive Up to 2.1 kW three-phase motor or single phase motor
Electrical Details/torque 400 V/3~, 50 Hz, 1790 watt, 5.5 Nm
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve insert used) LpAd = 78 dB
Weight 32 kg
Dimensions (W x D x H) table-mounting or on stand 42 x 48 x 69 cm
*depending voltage and frequency

 

The Cutting Mill PULVERISETTE 15 is also available in the following voltages:

Order no. Electrical details / Torque
15.4030.00 for 400 V/3~, 50 Hz, 1790 watt, 5.5 Nm
15.4020.00 for 200-240 V/1~, 50 Hz, 2150 watt, 4.8 Nm
15.4050.00 for 200 V/3~, 60 Hz, 2140 watt, 5.5 Nm
15.4010.00 for 100-120 V/1~, 60 Hz, 1900 watt, 3 Nm

The PULVERISETTE 15 with voltage of “/3~” can only be operated on a three-phase supply network.
The three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version obtains more power, better effectiveness and greater energy efficiency.

Other voltages on request!

Nº de pedido
15.4030.00
Benjamin Gagel
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Teléfono +49 67 84 70 0

Base de datos de protocolos de molienda

PROBAR AHORA

MOLIENDA DE PRUEBA INDIVIDUALMENTE

Envíenos su muestra. Realizamos una muestra de molienda y recomendamos el dispositivo adecuado para su aplicación.