Effective and inexpensive
The FRITSCH Cutting Mill PULVERISETTE 15 is the ideal laboratory Cutting Mill for comminution of dry samples of soft to medium-hard consistency, for fibrous or cellulosic materials, as well as for sample preparation according to RoHS, with a feed size of 70 x 70 mm and a throughput quantity of up to 50l/h. With a high cutting rotor speed of powerful 2,800 rpm, it ensures a high air throughput and especially fast and reproducible size reduction. The simple FRITSCH cleaning makes your work much easier.
Size reduction by cutting
The PULVERISETTE 15 comminutes sample material with a rotor with straight cutting edges and fixed knives by cutting forces. Due to the progressive cutting geometry between the cutting edges of the rotor and the fixed knives in the grinding chamber, the sample material is automatically transported away and thereby comminuted with the cutting principle increasingly fine between the knives until the desired final fineness is achieved. At the same time transports the FRITSCH-airflow the finished comminuted sample automatically into the collecting vessel.
Configure your Cutting Mill PULVERISETTE 15 exactly to your specific application
Different funnels enable an optimal feeding of materials. Rotors with interchangeable cutting edges ensure the highest degree of service life. Sieve inserts with trapezoidal and square perforations determine the final fineness of a sample. The cutting tools and sieve inserts are offered in different materials in order to accommodate the abrasion properties. A collecting vessel for 3.5 litres and for larger quantities a collecting vessel for 60 litres with filter hose may be utilized.
The PULVERISETTE 15 can be easily fixed to a table or the FRITSCH universal support stand may be ordered.